0102030405
Introduction of The Isuzu REAR HUB INNER OIL SEAL 1-09625569-0
Automotive seals play a vital and crucial role in different types of driven automobiles. They are mainly used with bearings, hubs, and different types of complex mechanical systems. It is used to prevent oil and lubricant leaks and components heat damage. OUPIN offers a wide range of high-performance seals to meet the complex needs of the automotive industry in a variety of scenarios and to support the development of the automotive industry.
Parameters of The Isuzu REAR HUB INNER OIL SEAL 1-09625569-0
| OE No. | 1-09625569-0, 1096255690 |
| Size | 95*132*12/22 |
| Brand | OUPIN |
| Material | NBR, HNBR, EPDM, SILICONE, FKM, FLS, FFPM, PTFE |
| Temperature | NBR(-40~120°C),FFKM(-20~320°C) FKM(-20~200°C),Silicone (-70~220°C) EPDM(-50~150°C),PU(-40~90°C) |
| Hardness | 30-90 shores A |
| Product Name: | REAR HUB INNER OIL SEAL |
| Application | ISUZU FSR11, SBR |
| Weight | 0.24KG |
| Engine Model | 6BD1 |
| Payment | L/C, T/T, Western Union, Paypal, Money Gram, Credit Card |
| Package | Neutral Package or Customized |
| Supply Ability | 10000 pieces /per month |
| Shipping | Small quantity: UPS/FeDex/DHL express Large quantity: by Sea/Air |
The Common Materials Of Oil Seals
Nitrile rubber, fluorine rubber, silicone rubber and so on.
Nitrile rubber (NBR): It has good heat resistance, wear resistance, resistance to various lubricants, grease, oil and gas mixtures, etc., applicable temperature -30 ~ 120 degrees Celsius, but can not be used in phosphate ester hydraulic oil and gear oil containing extreme pressure additives, in gasoline and low aniline point of mineral oil, the performance of stable.
Fluorine Rubber(FKM): Ageing resistance, heat resistance, oil resistance, almost applicable to all lubricants, fuel oils, gasoline, in the oil containing extreme pressure additives is not easy to harden, but cold resistance, high temperature abrasion resistance is poor, permanent compression deformation is greater, applicable to the temperature -20 ~ 250 degrees Celsius.
Where the running body box with liquid lubricant and connected to the external parts need oil seals. Some are rubber, some are metal, most of them are steel bone rubber, such as crankshaft rear oil seal, gearbox front and rear oil seals, left and right half-axis oil seals, main gearbox front oil seal, air compressor crankshaft oil seal.
The Main Factors Causing Oil Leakage Of Oil Seals
Poor sealing of oil seals is the main factor causing oil leakage. When the shaft appears to wear the formation of grooves, even if the replacement of new oil seals still can not seal, is due to the oil seal lip and shaft contact pressure drop, resulting in the installation of the oil seal lip diameter and the shaft diameter of the surplus is too small.
The Main Reasons For Poor Sealing Are:
① poor manufacturing quality of oil seals.
② poor quality of the shaft or bearing.
③ Improper use and maintenance.
④ Improper installation.
⑤ Improper storage, environmental pollution caused by the adverse effects.
oUPIN Certifications
oUPIN Factory
About OUPIN
OUPIN has been specializing in the manufacture of truck&trailer spare parts for more than 10 years and has become a professional exporter, we are committed to providing quality products and convenient service. Our products are sold all over the world and are well received by our customers. Due to our high quality products and excellent customer service, we have a sales network in more than 100 countries around the world, including the Africa, Middle East, Egypt, Arabia, Iran, Afghanistan, Syria and etc. We are looking forward to establishing a long-term cooperative relationships with customers all over the world in the near future.
